Sinotruk Engine Models and Parameters
T10 series howo sinotruk Engine:
T10.32-50: 320hp, 10L, National 5, natural gas engine
T10.34-40: 340hp, 10L, National IV/National V, natural gas engine
T10.23-40: 230hp, 10L, National IV, natural gas engine
T10.27-40: 270hp, 10L, National IV, natural gas engine
T10.29-40: 290hp, 10L, National IV, natural gas engine
T10.32-40: 320hp, 10L, National IV, Natural Gas Engine
T10.27-50: 270hp, 10L, National V, Natural Gas Engine
T10.29-50: 290hp, 10L, National V, Natural Gas Engine
T10.34-50: 340hp, 10L, National V, natural gas engine
MT13 series sinotruk howo engine:
MT13.43-50: 430hp, 13L, National 5, natural gas engine
Number of cylinders: 6 cylinders
Fuel Type: Natural Gas (LNG/CNG)
Displacement: 12.419L
Maximum output power: 316kW
Rated Speed: 1900rpm
Maximum torque: 1900N.m
Maximum torque speed: 1100-1400rpm
Minimum full-load fuel consumption rate: ≤190g/kW.h
Net weight of engine: 970kg
Compression ratio: 11.5:1
Noise outside one metre: ≤80dB
Cylinder bore x stroke: 126×166mm
Number of valves per cylinder: 4
Ignition sequence:1-5-3-6-2-43
1. Piston: applicable to different models of engines, such as Weichai Power, China National Heavy Duty Truck Howo, etc. For example, it is suitable for Weichai Power China Heavy Duty Truck Howo 612600030047A piston, China Heavy Duty Truck Howo VG1560030010 engine piston and so on.
2. Engine bracket: used to support and fix the engine to ensure its stable operation. For example, China Heavy Duty Truck Hawo Shaanqi Delong Heavy Duty Truck Parts Truck Parts VG1560037011 engine piston bracket .
3. Piston ring: used to seal the engine cylinder to prevent gas leakage. For example, Weichai Steyr wd615 engine original piston ring 2.
4. Cylinder gasket: used to seal the gap between the cylinder head and cylinder block to prevent gas leakage. For example, heavy duty haowo engine parts cylinder gasket .
5. Gears: used to transfer power and torque, including injection pump gears, timing gears and so on. For example, for Weichai Power Engine Howo Heavy Truck 612600080518 injection pump gear .
6.Generator: Sinotruk engine parts is used to generate electricity to supply vehicles and other electrical equipment. For example, generator for Heavy Duty Truck Howo Steyr and other models.
These Sinotruk engine parts are widely used in different Sinotruk howo models and engines to ensure the normal operation of the engine and the stable performance of the trucks.
sinotruk engine parts- D10 Engine
sinotruk engine parts- WD615.47 engine assembly
Sinotruk howo spare parts WD615 Engine
howo sinotruk 371 spare parts- WP10 Engine
Sinotruk howo spare parts WG9725190102.103 Air filter
howo sinotruk 371 spare parts- VG1560090001 starter
sinotruk spare parts- VG1540080211
sinotruk howo truck parts- VG1034080001
When repairing the mechanical Sinotruk engine parts, the following matters need to be noted.
-Safety first:When carrying out any maintenance work, you should comply with the relevant safety operation norms to ensure the safety of yourself and others,Safety first.
-Use the right tools: Use the right tools and equipment for disassembly and installation to avoid damage or safety accidents.
-Marking and recording:During the disassembly process, mark and record the position and installation sequence of each part in time to avoid installation errors or omissions.
-Standardised maintenance: operate in strict accordance with the Sinotruk howo engine maintenance manual pdf and relevant standards to avoid human error and wrong operation.
For driving safety, the Sinotruk howo engine must be carried out routine inspections of each component. If somewhere is abnormal, the vehicle should be sent to the repairing service station for maintenance.
Before running the diesel engine, the height of cooling level, fuel and oil level, and diesel level will be checked.
When the diesel engine is started, if it doesn’t work within 15 seconds, restart it after 2 minutes.
After diesel engine is started, idle speed running will last for 2-3 minutes. Fuel pressure will exceed 100,000Pa. When cooling water temperature is lower than 600C, do not run the engine at high-speed and heavy load at once, otherwise its wear resistance and reliability will be affected.
In the case that the engine working with load, load and speed must be reduced before shutdown. Idle speed running must last for no less than 5 minutes.
During running-in period (within 3000km), it is suitable for diesel engine to run only under medium load.
Sinotruk Engine Models-Sinotruk Maintenance Manual .Pdf
Hot Tags of sinotruk engine: sinotruk engine sinotruk howo 371 engine specifications sinotruk howo engine sinotruk engine specification sinotruk engine parts sinotruk howo truck parts Sinotruk engine manual